Call 910-776-0044

Blog

Centerline Construction Chat: Grinder Pumps

Categories: Brunswick County Home Building, Building a Home, Centerline Construction Chat, Grinder Pump, Jeff Satterwhite | Posted: September 8, 2012

In this video, Jeff Satterwhite explains Grinder Pumps – what they are, how they work and how to know when yours is not working! See below for the text version.

Grinder Pumps

Grinder Pump Tub – This is 6 feet deep and as wide as the circumference of the lid. It is basically a big fiberglass bucket in the ground, and when you flush your toilet, the gray water from it runs into this bucket, underground. There is a 4-inch line running from your toilet into the tank, falling to the bottom.

There is a big huge grinder pump or a macerator that sits at the bottom of the bucket with a float, when the bucket fills to a certain level, the float flips on the switch and it grinds the material like a blender and pumps it into the street through a 2-inch line.

You need to be careful with your grinder pump, because it is like a blender in that it has a large blade and it can get clogged.

The control box
– Is a 220 volt controller that controls the grinder pump and the switches in the tank. If the red light is blinking and there is an alarm going off on the control box, then the grinder pump (macerator) is not working and the alarm float is to its max level since the grinder is not working.

If this happens, you must call the county (Brunswick County) for them to come over and take care of your problem.

For questions or to learn more, contact Jeff Satterwhite: (910) 620-8883 or Jeff@gocenterline.com

To watch other Centerline Construction Chat tutorials, click here
To see other videos from Jeff Satterwhite, click here

admin

Comments are closed.